The SITRANS P500 has been developed to meet the highest expectations for measuring accuracy, ruggedness, and user-friendliness, and it merges seamlessly into the SITRANS P family. With the SITRANS P500, you can expect pressure measurement at the highest level.
It guarantees an accuracy of ≤ 0.03 % as well as outstanding values for the influence of static pressure and temperature on the measured result. In this way, it guarantees a total performance of ≤ 0.09 % up to a turndown of 10:1. Since this feature means that only one measuring cell can be used for different measuring ranges, inventory costs can be significantly reduced without the need for losses in the quality of the measured result. The high long-term stability of the sensor also reduces maintenance costs thanks to extended calibration intervals, and ensures that you can always rely on the measured results in the long term.
An innovated sensor assembly enables direct-connected use in process temperatures of up to 125 °C (257 °F) even without a remote seal system. With an improved 3-pushbutton operator input concept for setting the device, the SITRANS P500‘s host of diagnostics options can be used conveniently without software. Even curve displays and trend diagrams can be represented on the display for user-friendly process monitoring.
SITRANS P500 is also suitable for use in safety instrumented systems SIL2 according to IEC 61508 / 61511.
Optimized operator input: Can be set with a high degree of user-friendliness via a full-text-enabled, backlit display and 3 pushbuttons. The transmitter can also be configured and operated conveniently from the control system using the HART protocol
Easy configuration via HART with improved EDD* including a new quick start wizard
Extensive diagnostics such as 8 min/max pointers for process values showing also the time of the event
Process temperature up to 125 °C (257 °F) possible without remote seals
Backlit, graphics-enabled display
Space-savings thanks to process flanges of only 86 mm (3.4“) in length
Structure your plant network using SCALANCE X-500 as the central component and thus create the ideal basis for the implementation of networks that set new standards when it comes to reliability and performance.
Enjoy complete freedom of choice of connection media, employ a variety of redundancy concepts, and connect your plant network to your corporate IT system.
The optimal basis for the digital challenges of the process industry.
In any facility, space comes at a premium. And at a cost. Our response is the SIMATIC ET 200SP HA. The compact, modular periphery creates space in the control panel, providing advantages for system designers and operators. Its highly scalable structure makes it possible to precisely align expansions in the control panel with actual needs. And tool-free connection using push-in terminals and fixed wiring cuts the costs of engineering, assembly and wiring.
In any facility, space comes at a premium. And at a cost. Our response is the SIMATIC ET 200SP HA. The compact, modular periphery creates space in the control panel, providing advantages for system designers and operators. Its highly scalable structure makes it possible to precisely align expansions in the control panel with actual needs. And tool-free connection using push-in terminals and fixed wiring cuts the costs of engineering, assembly and wiring.
1. Components
The system basically consists of the following components:
Carrier modules for interface modules: The carrier modules are used for the electrical and mechanical connection of the individual modules.
Interface modules (IM) for connection to PROFINET single or redundant. The fieldbus is connected via the Busadapter (BA), which allows connection technology and physics to be freely selected according to the application requirements.
Server module closes the station.
Carrier modules for I/O modules: By connecting the carrier modules to the terminal blocks, the slots for the I/O modules are created.
Terminal blocks: The terminal blocks provide the process terminals for connecting the sensors, actuators and other devices.
I/O modules determine the function of the module at the terminals. I/O modules are subdivided into module types. These are characterized in each case by modul-type-specfic and colored square printed on the front.
Digital input (DI), color: white
Digital output (DQ), color: black
Analog input (AI), color: light blue
Analog output (AQ), color: dark blue
Analog/Digital (CIQ), color: grey
Accessories (opional)
Labeling strips and color identification labels are offered for individual labeling.
For the color identification of the potentials defined by the plugged I/O module, there are module-specific color identification labels.
A shield connection is available for fast, low-impedance connection of cable shields.
2. Order numbers
Product
Order number
I/O modules
ET 200SP HA, AI 16xI 2-WIRE HART
6DL1134-6TH00-0PH1
ET 200SP HA, AI16xTC/8xRTD 2-/3-/4-WIRE
6DL1134-6JH00-0PH1
ET 200SP HA, AI-DI16/DQ16x24VDC HART
6DL1133-6EW00-0PH1
ET 200SP HA, AQ 8xI HART HA
6DL1135-6TF00-0PH1
ET 200SP HA, DI 16x24VDC
6DL1131-6BH00-0PH1
ET 200SP HA, DI 8x230VAC
6DL1131-6GF00-0PK0
ET 200SP HA, DI 8×24 …125VDC HA
6DL1131-6DF00-0PK0
ET 200SP HA, DI16x NAMUR
6DL1131-6TH00-0PH1
ET 200SP HA, DQ 16x24VDC/0,5A
6DL1132-6BH00-0PH1
ET 200SP HA, RQ 4x24VUC 230VAC/5A Changer
6DL1132-6HD50-0PK0
Carrier modules
Carrier module IM redundant with server module
6DL1193-6BH00-0RM0
Carrier module IM single with server module & IM cover
6DL1193-6BH00-0SM0
Carrier module for 2 I/O modules from a ET 200SP HA
6DL1193-6GA00-0NN0
Carrier module for 8 I/O modules from a ET 200SP HA
6DL1193-6GC00-0NN0
Interface modules
IM 155-6 PN
6DL1155-6AU00-0PM0
Busadapter
ET 200SP HA, Busadapter 2xRJ45
6DL1193-6AR00-0AA0
ET 200SP HA, Busadapter 2xFC
6DL1193-6AF00-0AA0
ET 200SP HA, Busadapter 2xLC
6DL1193-6AG00-0AA0
Server modules
ET 200SP HA, server module (spare part)
6DL1193-6PA00-0AA0
Mounting rails
Mounting rail 482mm (19″)
6DL1193-6MC00-0AA0
Mounting rail 1500mm (59″)
6DL1193-6MD00-0AA0
Terminal blocks
Terminal block TB22-P16+A0+4B (dark colored)
6DL1193-6TP00-0BK0
Terminal block TB22-P16+A0+4D (light colored)
6DL1193-6TP00-0DK0
Terminal block TB22-P32+A0+4B/T (dark colored)
6DL1193-6TP00-0BH1
Terminal block TB22-P32+A0+4D/T (light colored)
6DL1193-6TP00-0DH1
Terminal block TB45R-P32+A0+4B/T (dark colored)
6DL1193-6TP00-0BM1
Terminal block TB45R-P32+A0+4D/T (light colored)
6DL1193-6TP00-0DM1
Cover
5 TM-Cover, 22,5MM, to protect empty PM slots
6DL1133-6CV22-0AM0
5 IM-Cover, 50MM, to protect empty IM slots
6DL1133-6CV50-0AM0
Labeling stripes
450 Labeling stripes, light grey, 10 sheets DIN A4, perforated, paper 280g/m²
6DL1193-6LA00-0AA0
500 Labeling stripes, light grey, roll with 500 labels
6DL1193-6LR00-0AA0
Color identification labels
10 color identifications labels, color code CC00
6DL1193-6CP00-2HH1
10 color identifications labels, color code CC01
6DL1193-6CP01-2HH1
10 color identifications labels, color code CC02
6DL1193-6CP02-2HH1
10 color identifications labels, color code CC40
6DL1193-6CP40-2HK0
10 color identifications labels, color code CC42
6DL1193-6CP42-2HK0
3. Benefits
Ease of use Ease of use The SIMATIC ET 200SP HA impresses with its especially simple installation and assembly. The new terminal block layout and the push-in technology make tool-free wiring possible. Higher flexibility during the installation in the control cabinet is possible due to the separation of mechanical and elec tronical components, allowing the station to be prewired without I/O modules. Slot covers can be inserted on the integrated terminal blocks, which can be replaced at any time. In addition, the online station expansion of the SIMATIC ET 200SP HA offer advantages in terms of system flexibility and plant availability. Benefit from the seamless integration in SIMATIC PCS 7. The SIMATIC ET 200SP HA with the Advanced Process Library offers flexible and simple online parameterization and selection of up to four HART variables on each channel of an I/O module.
Maximum availability Plant downtime considerably reduces the economic efficiency of process plants. Redundant, flexible components significantly increase the availability of the plant. Besides operating the SIMATIC ET 200SP HA station redundantly via the PROFINET interface, there is also the possibility of a redundant set up of the I/O modules. This is realized by using a terminal block for integrated I/O redundancy which results in both economy of space and cost efficiency. With the new design and its standardized terminal blocks, redundant and single wiring are related to the same wiring effort.
Compact design The compact size with up to 56 peripheral modules per station and the high channel density of up to 32 channels on a 22.5 mm wide module reduces the space requirement in the control cabinet to a minimum.
Ready for the field
For installation in hazardous areas up to zone 2
Extended temperature range: -40 to +70°C
Enhanced interference immunity according to NAMUR recommendation NE21
Conformal coating of all components
Can be used up to an altitude of 4 000 meters
4. Engineering
Capacity limits The following limit values apply to the IM155-6PN interface module:
I/(O modules: max. 56
Adress space: max. 1440 Byte
Note The SIMATIC ET 200SP HA will be on sale from June 2017. System requirements are SIMATIC PCS 7 V9.0, S7-410 and PROFINET.
SCALANCE XM-400 switches offer you more – and effectively address the growing demands of your communication network. The pluggable transceivers with various connectors (for SC, ST/BFOC and LC connection technology) offer you maximum flexibility for automation networks. Thanks to their modular architecture, these Industrial Ethernet switches allow for tool-free expansion with port extenders.
With the help of the KEY-PLUG XM-400, Layer 3 functions can also be optionally activated – thus further increasing performance.
Learn more about SCALANCE XM-400
Detail
Basic devices
SCALANCE XM416-4C: with 16x RJ45, 4x SFP slots
SCALANCE XM408-8C: with 8x RJ45, 8x SFP slots
SCALANCE XM408-4C: with 8x RJ45, 4x SxP slots (for transceivers with SC and ST/BFOC connection technology)
Port extenders To extend the basic devices to a maximum of 24 ports:
Port extender PE408: eight additional RJ45 ports
Port extender PE400-8SFP: eight additional SFP slots
Port Extender PE408PoE: eight additional RJ45 ports with PoE according to IEEE 802.3at Type 2 (suitable SCALANCE Power Supplies available separately)
Advantages
Fast mobile network diagnostics for the first time by smartphone or tablet via WLAN
Electrical or optical networking via comboports, even during operation (hot swappable)
The SCALANCE XR-300EEC (Enhanced Environmental Conditions) managed Industrial Ethernet Switches are racks switches for installation in a 19″ control cabinet and especially designed for power plants or extreme environmental conditions.
The SCALANCE XR-300EEC switches feature high noise immunity and can be used in an extended temperature range (-40°to +80C), for example, in energy automation applications.
Some of them are modular, in other words, up to four media modules can be freely plugged in, thus enabling flexible network construction or expansion.
Benefits
Use in hazardous areas according to IEC 61850-3 / IEEE 1613
Wide-ranging IT functions for high-speed plant networks
Integration in the PROFINET diagnostics
Fast device replacement in case of fault is with the C-PLUG removable medium
The SCALANCE X-300/XR-300 managed Industrial Ethernet switches are highly suited for configuring line, star and ring topologies (10/100 Mbps) in plants. Their modular design allows for easy system expansion using various media modules: up to 24 electric or four optical ports (BFOC/ST) for distances up to 26km.
The switches provide high-speed redundancy in the ring and, thanks of the C-PLUG removable medium, can be easily replaced in the event of a fault without specialized skills.
The MM992-2VD media module (variable distance), which is plugged into a modular SCALANCE X-300 switch or SCALANCE S627-2M security module, can use any two-wire cables for Ethernet connections up to 1000 m. This includes, for example, land lines, lines through fireproof bulkheads or along pipelines, which can be very difficult to replace. It can also be used to establish a PROFINET connection up to 300 m.
SCALANCE X-300 is available in various versions:
SCALANCE X-300 as compact device
SCALANCE XR-300 as modular rack version
SCALANCE X-300PoE/XR-300PoE with Power-over-Ethernet
SCALANCE XR-300TS for applications in the transportation sector
Benefits
Wide-ranging IT functions for high-speed plant networks
Economical through flexible use of freely configurable basic units
Simple installation in the control cabinet due to 19″ design (SCALANCE XR-300)
Saving from network cable with Power-over-Ethernet through the transmission of data and power over a single line (SCALANCE X-300PoE/XR-300PoE)
Use in transportation applications (SCALANCE XR-300TS)
The cost-optimized managed SCALANCE XR 300WG 19″ rack switches (work group) have a small mounting depth, which means two switches can be installed on both sides to save space in the control cabinet. This makes them ideally suited for a wide variety of industry-related applications.
SCALANCE XR-300WG switches provides high availability on the network through features such as redundancy mechanisms (MRP) or virtual LANs (VLAN). They feature up to 28 Gigabit ports and combo ports and can also bridge long distances thanks to their fiber optic interfaces (SFP).
Benefits
Cost-effective and space-saving 19″ control cabinet
Use in hazardous areas due to approvals such as ATEX Ex Zone 2
Full integration in PROFINET or Ethernet/IP diagnostics
Specially designed for strict real-time applications: The SCALANCE X-200IRT managed Industrial Ethernet switches (isochronous real time) are extremely versatile, they can be used for machine-level applications right up to networked plant sections in PROFINET environments.
The SCALANCE X-200IRT real-time switches with integrated real-time ASIC are ideal, for example, for high-performance, isochronous motion control applications.
Detail
SCALANCE XF204-2BA IRT in SIMATIC ET 200SP design can be fitted with various bus adapters
SCALANCE X-200IRT in compact design with different port configurations
SCALANCE XF-200IRT as flat as the ET 200S with easily accessible cable outlet
Benefits
Universal in use for strict real-time requirements
Simple commissioning and engineering
Increased plant availability thanks to diverse functions
Flexible configuration of electrical and/or optical network topologies
The low-cost conversion of electrical signals into optical signals within Industrial Ethernet networks is made possible with the compact SCALANCE X101-1 media converter.
Advantages
Conversion from one network to the other (electrical or optical)
Bridging distances of up to 26 km (single mode)
PROFINET-compliant securing collar for reliable data transmission
SCALANCE XB-100 Industrial Ethernet switches have a high port density with up to 24 x RJ45 ports and a data rate of 10/100 Mbps. Its plastic enclosure makes it a lightweight, and its compact design makes it ideal for installation in control cabinets. Versions with fiber-optic connections enable setup of both electrical as well as optical line and star topologies.
All SCALANCE XB-100 devices are ideally suited to be used in the industry thanks to their redundant power supply of 24 V DC. On account of their 24 V AC power supply, the switches are also an excellent choice for the Ethernet connection of monitoring, control and optimization devices.
Benefits
Up to 24 ports for large quantity structures at the field level
Reliable thanks to redundant power supply
Can be used for industry and buildings with 24 V DC or 24 V AC (50/60 Hz)
PROFINET CC-A compliant and suitable for hazardous areas of Zone 2 (ATEX, IECEx)
Whatsapp us ...