Tag: distributor resmi siemens

Load cell SIWAREX WL230 SB-S SA

The shear beam load cell SIWAREX WL230 SB-S SA is extremely compact and therefore especially useful in crowded conditions.

Mounted with the belonging SIWAREX mounting unit the installation height up to 2t is only 76mm (3″) and for 5t only 111mm (4,4″). In connection with the resolution of 15.000, the SIWAREX WL230 SB-S SA is ideal for use in large sized platform scales, batching systems, sacking systems or bin scales.

Also the useage in legal for trade scales is possible, the load cell provides the accuracy class C3 according to OIML R60.

Detail

 Rated load 500, 1000, 2000, 5000kg
 Accuracy class C3 according to OIML R60
 Resolution 10.000…15.000 
 Degree of protection IP68
 Sensor material (DIN) Stainless Steel


Benefits

  • egal for trade 
  • extremely compact design 
  • easy and quick installation with SIWAREX mounting units

SITRANS P200/P210/P220

The SITRANS transmitters P200, P210 and P220 are compact single-range-transmitters for measurement of absolute and gauge pressure.

In this series we use two different kinds of pressure sensors: two stainless steel sensors and one ceramics sensor. So the measurement of process pressure, absolute pressure and hydrostatic pressure is an easy thing. The measured pressure will be transformed with these sensors into a 4…20-mA- resp. a 0…10-V-signal.

Detail

 Nonlinearity ≤ 0,25 %
 Long-term stability ≤ 0,25% / 12 Monate
 Measuring range SITRANS P200: 1 bar to 60 bar gauge                           0,6 bar to 16 bar absolute
  SITRANS P210: 100 mbar to 600 mbar gauge
  SITRANS P220: 2,5 bar to 1000 bar gauge


Benefits

  • High measuring accuracy
  • Rugged stainless steel enclosure
  • High overload withstand capability
  • For aggressive and non-aggressive media
  • For measuring the pressure of liquids, gases and vapors
  • Compact design

SCALANCE XR-300EEC

Use in harsh environments

The SCALANCE XR-300EEC (Enhanced Environmental Conditions) managed Industrial Ethernet Switches are racks switches for installation in a 19″ control cabinet and especially designed for power plants or extreme environmental conditions.

The SCALANCE XR-300EEC switches feature high noise immunity and can be used in an extended temperature range (-40°to +80C), for example, in energy automation applications.

Some of them are modular, in other words, up to four media modules can be freely plugged in, thus enabling flexible network construction or expansion.

Benefits

  • Use in hazardous areas according to IEC 61850-3 / IEEE 1613
  • Wide-ranging IT functions for high-speed plant networks
  • Integration in the PROFINET diagnostics
  • Fast device replacement in case of fault is with the C-PLUG removable medium

SCALANCE X-300/XR-300

High performance for plant structuring

The SCALANCE X-300/XR-300 managed Industrial Ethernet switches are highly suited for configuring line, star and ring topologies (10/100 Mbps) in plants. Their modular design allows for easy system expansion using various media modules: up to 24 electric or four optical ports (BFOC/ST) for distances up to 26km.

The switches provide high-speed redundancy in the ring and, thanks of the C-PLUG removable medium, can be easily replaced in the event of a fault without specialized skills.

The MM992-2VD media module (variable distance), which is plugged into a modular SCALANCE X-300 switch or SCALANCE S627-2M security module, can use any two-wire cables for Ethernet connections up to 1000 m. This includes, for example, land lines, lines through fireproof bulkheads or along pipelines, which can be very difficult to replace. It can also be used to establish a PROFINET connection up to 300 m.

SCALANCE X-300 is available in various versions:

  • SCALANCE X-300 as compact device
  • SCALANCE XR-300 as modular rack version
  • SCALANCE X-300PoE/XR-300PoE with Power-over-Ethernet
  • SCALANCE XR-300TS for applications in the transportation sector

Benefits

  • Wide-ranging IT functions for high-speed plant networks
  • Economical through flexible use of freely configurable basic units
  • Simple installation in the control cabinet due to 19″ design (SCALANCE XR-300)
  • Saving from network cable with Power-over-Ethernet through the transmission of data and power over a single line (SCALANCE X-300PoE/XR-300PoE)
  • Use in transportation applications (SCALANCE XR-300TS)

SCALANCE XR-300WG

Cost-optimized and small mounting depth

The cost-optimized managed SCALANCE XR 300WG 19″ rack switches (work group) have a small mounting depth, which means two switches can be installed on both sides to save space in the control cabinet. This makes them ideally suited for a wide variety of industry-related applications.

SCALANCE XR-300WG switches provides high availability on the network through features such as redundancy mechanisms (MRP) or virtual LANs (VLAN). They feature up to 28 Gigabit ports and combo ports and can also bridge long distances thanks to their fiber optic interfaces (SFP).

Benefits

  • Cost-effective and space-saving 19″ control cabinet
  • Use in hazardous areas due to approvals such as ATEX Ex Zone 2
  • Full integration in PROFINET or Ethernet/IP diagnostics

SCALANCE X-100 Media Converters

Customized conversion

The low-cost conversion of electrical signals into optical signals within Industrial Ethernet networks is made possible with the compact SCALANCE X101-1 media converter.

Advantages

  • Conversion from one network to the other (electrical or optical)
  • Bridging distances of up to 26 km (single mode)
  • PROFINET-compliant securing collar for reliable data transmission
  • Fast diagnostics thanks to signaling contact

SCALANCE XB-100

Switch product line for industry and buildings

SCALANCE XB-100 Industrial Ethernet switches have a high port density with up to 24 x RJ45 ports and a data rate of 10/100 Mbps. Its plastic enclosure makes it a lightweight, and its compact design makes it ideal for installation in control cabinets. Versions with fiber-optic connections enable setup of both electrical as well as optical line and star topologies.

All SCALANCE XB-100 devices are ideally suited to be used in the industry thanks to their redundant power supply of 24 V DC. On account of their 24 V AC power supply, the switches are also an excellent choice for the Ethernet connection of monitoring, control and optimization devices.

Benefits

  • Up to 24 ports for large quantity structures at the field level
  • Reliable thanks to redundant power supply
  • Can be used for industry and buildings with 24 V DC or 24 V AC (50/60 Hz)
  • PROFINET CC-A compliant and suitable for hazardous areas of Zone 2 (ATEX, IECEx)

SCALANCE XR-100WG

Cost-optimized and minimal mounting depth

The cost-optimized unmanaged SCALANCE XR 100WG 19″ rack switches (work group) have a small mounting depth, which means two switches can be installed on both sides to save space in the control cabinet. This makes them ideally suited for a wide variety of industry-related applications and control rooms. SCALANCE XR-100WG has up to 24 Fast Ethernet ports, and the 24 VDC versions with a redundant power supply can deliver reliable operation, even during power failures.

Benefits

  • Cost-optimized and space-saving 19″ control cabinet
  • Use in hazardous areas due to approvals such as ATEX Ex Zone 2
  • Versions with 24 VDC and 100-240 VAC

SCALANCE XC-100

With industry-standard design

The robust unmanaged Industrial Ethernet Switches SCALANCE XC-100 with electrical and/or optical port variants enable cost-optimized networking at the machine level – even with extreme temperature fluctuations.

With SCALANCE X108PoE, you also save on installation costs thanks to integrated Power-over-Ethernet functionality: Data and power are transferred over a single cable (Railway approval EN 50155).


Advantages

  • Reliable and fail-safe thanks to redundant voltage infeed
  • Can be used under rough ambient conditions (-40°C to +70°C) and in hazardous areas of Zone 2 (ATEX, IECEx)
  • Cost savings due to matching product variants (up to 24 ports, Power-over-Ethernet) and industry-compliant retaining collar for reliable data transfer
  • Tested under extreme conditions
  • Fast error detection thanks to clear diagnostics LED

Compact Switch Modules (CSM)

More connectivity to SIMATIC at a low cost

Increase the number of interfaces directly on the SIMATIC S7, ET 200M or LOGO! logic modules at low cost: integrate machines into existing plants with the aid of the unmanaged Compact Switch Modules (CSM).

The unmanaged CSM in the respective design of the LOGO!, SIMATIC S7-1200/S7-300 or ET 200M expand the connection options thanks to their additional interfaces.

  • LOGO! CSM for LOGO! logic modules with industrial Ethernet interface
  • CSM 1277 for SIMATIC S7-1200
  • CSM 377 for SIMATIC S7-300, S7-mEC or ET 200M
  • Flexible expansion of the network thanks to simple connection of the CSM
  • Space-saving design of each SIMATIC or LOGO! terminal device
  • Support of stand-alone use as unmanaged 4-port switch for industrial Ethernet networks