The RD300 is a remote display for level, flow, pressure, weighing, and other process instruments. This display also acts as a multi-purpose, easy to use rate/totalizer ideal for flow rate, total, and control applications.
Data can be remotely collected, logged and presented on your local computer using the free downloadable RD Software.
The display accepts a single input of current and voltage. This makes the RD300 an ideal fit for use with most field instruments.
The RD300 can be set up as a standard panel mount, or combined with optional enclosures to allow it to house up to 6 displays.
Key Applications: Tank farms, pump alternation control, local or remote display of level, flow, pressure and weighing instrument values, PC monitoring and data logging with RD Software
Benefits
Easy setup and programming via front panel buttons or remotely using RD software
Display readable in sunlight
Input: accepts current and voltage
Single or dual 24 V DC transmitter power supply
Serial communication using built in protocol or Modbus RTU
Supports up to 8 relays and 8 digital I/O for process control and alarming
32-Point Linearization, square root or exponential linearization
Multi-pump alternation control
Supports total, grand total or non-resettable grand total
9-digit totalizer with total overflow feature
Large dual-line 6-digit display
Configure, monitor, and datalog from a PC
Dual-Input option with math functions: addition, difference, average, multiplication, division, minimum, maximum, weighted average, ratio, concentration
The pressure transmitter SITRANS LH300 is a submersible sensor for hydrostatic level measurement with protective caps made of PPE, stainless steel and ETFE. The transmitter converts the level-proportional hydrostatic pressure into a standardized 4 to 20 mA signal. The transmitter consists of a stainless steel housing (Ø 30 mm) with mechanical protection IP68 and the piezo-resistive sensor with ceramic diaphragm made of 99,6 % purity ceramic ensures versatile use, also good in drinking water systems. The transmitter cable has a diameter of Ø 8 mm and also contains a vent pipe for connection to atmosphere. The pressure transmitter measures liquid levels in tanks, containers, channels and dams. SITRANS LH300 pressure transmitters are available for various measuring ranges and with explosion protection as an option.
Detail
Accuracy
0.15%
Long-term stability
0.15 %/12 months
Measuring range
0 – 1 mH2O bis 0 – 4 mH2O
Benefits
Compact design
Simple installation
Measuring accuracy typically 0.15 %
IP68 protection with standard cable lengths of 5, 10, 20, 30, 50m, if needed, up to 1000m special length
Explosion protected version with ATEX II 1 G Ex ia IIC T4 Ga and IEC Ex Ex ia IIC T4 Ga available
The SITRANS P Compact is an analog transmitter for measuring absolute and relative pressure which has been developed specially for the requirements of the food/pharmaceutical and biotechnology industries
Detail
Accuracy
≤ 0,2 %
Long-Term Stability
≤ 0.1 % / 12 months
Measuring range
0 – 160 mbar (0 – 64 inchH2O) to 0 – 40 bar (0 – 580 psi)
Benefits
Hygiene-based design according to EHEDG, FDA und GMP recommendations
The SITRANS P280 is a WirelessHART pressure transmitter that provides all measured process values as well as diagnostic information, parameters and functions via radio. The device is powered by an internal battery and designed for ultralow power consumption. The compact and rugged design makes it specially suitable for direct mounting on tanks and pipes in remote parts of plants, and on moving or rotating equipment for process monitoring or asset management applications.
Detail
Accuracy
± 0.25 % of full scale;max. +/- 0.25 % of sensor’s span
Long-Term Stability
≤ 0.25 % / 12 months
Measuring range
0 – 1.6 bar (0 – 23 psi) …0 – 320 bar (0 – 4641 psi)
Benefits
Various pressure ranges available (1.6, 10, 50, 200, 320 bar; 23, 145, 725, 2900, 4641 psi).
LCD display with functional display items and icons, English and German display selectable
Practical push buttons: Three push buttons for maximum efficiency for setup, diagnostics, communication and security settings with no additional devices or tools
Maintenance-friendly backlight function
Sleep mode for efficient battery life management
Battery status display on LCD and in network overview
Precise measurement accuracy for more productivity
90 and 180 degree display turnable
Configurable with standard tools supporting EDD – e. g. with SIMATIC PDM
The optimal basis for the digital challenges of the process industry.
In any facility, space comes at a premium. And at a cost. Our response is the SIMATIC ET 200SP HA. The compact, modular periphery creates space in the control panel, providing advantages for system designers and operators. Its highly scalable structure makes it possible to precisely align expansions in the control panel with actual needs. And tool-free connection using push-in terminals and fixed wiring cuts the costs of engineering, assembly and wiring.
In any facility, space comes at a premium. And at a cost. Our response is the SIMATIC ET 200SP HA. The compact, modular periphery creates space in the control panel, providing advantages for system designers and operators. Its highly scalable structure makes it possible to precisely align expansions in the control panel with actual needs. And tool-free connection using push-in terminals and fixed wiring cuts the costs of engineering, assembly and wiring.
1. Components
The system basically consists of the following components:
Carrier modules for interface modules: The carrier modules are used for the electrical and mechanical connection of the individual modules.
Interface modules (IM) for connection to PROFINET single or redundant. The fieldbus is connected via the Busadapter (BA), which allows connection technology and physics to be freely selected according to the application requirements.
Server module closes the station.
Carrier modules for I/O modules: By connecting the carrier modules to the terminal blocks, the slots for the I/O modules are created.
Terminal blocks: The terminal blocks provide the process terminals for connecting the sensors, actuators and other devices.
I/O modules determine the function of the module at the terminals. I/O modules are subdivided into module types. These are characterized in each case by modul-type-specfic and colored square printed on the front.
Digital input (DI), color: white
Digital output (DQ), color: black
Analog input (AI), color: light blue
Analog output (AQ), color: dark blue
Analog/Digital (CIQ), color: grey
Accessories (opional)
Labeling strips and color identification labels are offered for individual labeling.
For the color identification of the potentials defined by the plugged I/O module, there are module-specific color identification labels.
A shield connection is available for fast, low-impedance connection of cable shields.
2. Order numbers
Product
Order number
I/O modules
ET 200SP HA, AI 16xI 2-WIRE HART
6DL1134-6TH00-0PH1
ET 200SP HA, AI16xTC/8xRTD 2-/3-/4-WIRE
6DL1134-6JH00-0PH1
ET 200SP HA, AI-DI16/DQ16x24VDC HART
6DL1133-6EW00-0PH1
ET 200SP HA, AQ 8xI HART HA
6DL1135-6TF00-0PH1
ET 200SP HA, DI 16x24VDC
6DL1131-6BH00-0PH1
ET 200SP HA, DI 8x230VAC
6DL1131-6GF00-0PK0
ET 200SP HA, DI 8×24 …125VDC HA
6DL1131-6DF00-0PK0
ET 200SP HA, DI16x NAMUR
6DL1131-6TH00-0PH1
ET 200SP HA, DQ 16x24VDC/0,5A
6DL1132-6BH00-0PH1
ET 200SP HA, RQ 4x24VUC 230VAC/5A Changer
6DL1132-6HD50-0PK0
Carrier modules
Carrier module IM redundant with server module
6DL1193-6BH00-0RM0
Carrier module IM single with server module & IM cover
6DL1193-6BH00-0SM0
Carrier module for 2 I/O modules from a ET 200SP HA
6DL1193-6GA00-0NN0
Carrier module for 8 I/O modules from a ET 200SP HA
6DL1193-6GC00-0NN0
Interface modules
IM 155-6 PN
6DL1155-6AU00-0PM0
Busadapter
ET 200SP HA, Busadapter 2xRJ45
6DL1193-6AR00-0AA0
ET 200SP HA, Busadapter 2xFC
6DL1193-6AF00-0AA0
ET 200SP HA, Busadapter 2xLC
6DL1193-6AG00-0AA0
Server modules
ET 200SP HA, server module (spare part)
6DL1193-6PA00-0AA0
Mounting rails
Mounting rail 482mm (19″)
6DL1193-6MC00-0AA0
Mounting rail 1500mm (59″)
6DL1193-6MD00-0AA0
Terminal blocks
Terminal block TB22-P16+A0+4B (dark colored)
6DL1193-6TP00-0BK0
Terminal block TB22-P16+A0+4D (light colored)
6DL1193-6TP00-0DK0
Terminal block TB22-P32+A0+4B/T (dark colored)
6DL1193-6TP00-0BH1
Terminal block TB22-P32+A0+4D/T (light colored)
6DL1193-6TP00-0DH1
Terminal block TB45R-P32+A0+4B/T (dark colored)
6DL1193-6TP00-0BM1
Terminal block TB45R-P32+A0+4D/T (light colored)
6DL1193-6TP00-0DM1
Cover
5 TM-Cover, 22,5MM, to protect empty PM slots
6DL1133-6CV22-0AM0
5 IM-Cover, 50MM, to protect empty IM slots
6DL1133-6CV50-0AM0
Labeling stripes
450 Labeling stripes, light grey, 10 sheets DIN A4, perforated, paper 280g/m²
6DL1193-6LA00-0AA0
500 Labeling stripes, light grey, roll with 500 labels
6DL1193-6LR00-0AA0
Color identification labels
10 color identifications labels, color code CC00
6DL1193-6CP00-2HH1
10 color identifications labels, color code CC01
6DL1193-6CP01-2HH1
10 color identifications labels, color code CC02
6DL1193-6CP02-2HH1
10 color identifications labels, color code CC40
6DL1193-6CP40-2HK0
10 color identifications labels, color code CC42
6DL1193-6CP42-2HK0
3. Benefits
Ease of use Ease of use The SIMATIC ET 200SP HA impresses with its especially simple installation and assembly. The new terminal block layout and the push-in technology make tool-free wiring possible. Higher flexibility during the installation in the control cabinet is possible due to the separation of mechanical and elec tronical components, allowing the station to be prewired without I/O modules. Slot covers can be inserted on the integrated terminal blocks, which can be replaced at any time. In addition, the online station expansion of the SIMATIC ET 200SP HA offer advantages in terms of system flexibility and plant availability. Benefit from the seamless integration in SIMATIC PCS 7. The SIMATIC ET 200SP HA with the Advanced Process Library offers flexible and simple online parameterization and selection of up to four HART variables on each channel of an I/O module.
Maximum availability Plant downtime considerably reduces the economic efficiency of process plants. Redundant, flexible components significantly increase the availability of the plant. Besides operating the SIMATIC ET 200SP HA station redundantly via the PROFINET interface, there is also the possibility of a redundant set up of the I/O modules. This is realized by using a terminal block for integrated I/O redundancy which results in both economy of space and cost efficiency. With the new design and its standardized terminal blocks, redundant and single wiring are related to the same wiring effort.
Compact design The compact size with up to 56 peripheral modules per station and the high channel density of up to 32 channels on a 22.5 mm wide module reduces the space requirement in the control cabinet to a minimum.
Ready for the field
For installation in hazardous areas up to zone 2
Extended temperature range: -40 to +70°C
Enhanced interference immunity according to NAMUR recommendation NE21
Conformal coating of all components
Can be used up to an altitude of 4 000 meters
4. Engineering
Capacity limits The following limit values apply to the IM155-6PN interface module:
I/(O modules: max. 56
Adress space: max. 1440 Byte
Note The SIMATIC ET 200SP HA will be on sale from June 2017. System requirements are SIMATIC PCS 7 V9.0, S7-410 and PROFINET.
The low-cost conversion of electrical signals into optical signals within Industrial Ethernet networks is made possible with the compact SCALANCE X101-1 media converter.
Advantages
Conversion from one network to the other (electrical or optical)
Bridging distances of up to 26 km (single mode)
PROFINET-compliant securing collar for reliable data transmission
The cost-optimized unmanaged SCALANCE XR 100WG 19″ rack switches (work group) have a small mounting depth, which means two switches can be installed on both sides to save space in the control cabinet. This makes them ideally suited for a wide variety of industry-related applications and control rooms. SCALANCE XR-100WG has up to 24 Fast Ethernet ports, and the 24 VDC versions with a redundant power supply can deliver reliable operation, even during power failures.
Benefits
Cost-optimized and space-saving 19″ control cabinet
Use in hazardous areas due to approvals such as ATEX Ex Zone 2
The robust unmanaged Industrial Ethernet Switches SCALANCE XC-100 with electrical and/or optical port variants enable cost-optimized networking at the machine level – even with extreme temperature fluctuations.
With SCALANCE X108PoE, you also save on installation costs thanks to integrated Power-over-Ethernet functionality: Data and power are transferred over a single cable (Railway approval EN 50155).
Advantages
Reliable and fail-safe thanks to redundant voltage infeed
Can be used under rough ambient conditions (-40°C to +70°C) and in hazardous areas of Zone 2 (ATEX, IECEx)
Cost savings due to matching product variants (up to 24 ports, Power-over-Ethernet) and industry-compliant retaining collar for reliable data transfer
Tested under extreme conditions
Fast error detection thanks to clear diagnostics LED
mplement a simple machine network at low cost: The SCALANCE X-000 unmanaged Industrial Ethernet switches are the space-saving entry-level solution for setting up small Industrial Ethernet topologies.
The SCALANCE X-000 unmanaged switches are ideal for simple machine networking because they are small, compact and low-cost.
SCALANCE XB-000 variants with 24 V AC can also be used for building automation, for example.
Detail
SCALANCE XB-000 with plastic housing for use in less demanding industrial environments from -10°C to +60°C
SCALANCE X005 with rugged metal enclosure for use in harsh industrial environments
SCALANCE XB004-1, XB004-1LD and XB005 with 24 V AC power supply for building automation
The industrial Ethernet switch SCALANCE XF204-2BA DNA (Dual Network Access) enables integration of S2 devices in a high-availability PROFINET system (R1 system) via what is termed as Y-Switch functionality.
Two ports of the Y-Switch enable the connection of S2 devices using the media redundancy method, MRP. This can be implemented selectively via copper or fiber optic in a ring structure.
The two other ports establish the network connection from the Y-Switch to a high-availability R1 system.
Y-switch functionality additionally increases the availability of a process plant and helps avoid plant standstills.
The BA 2xRJ45VD HA BusAdapter is capable of both standard Ethernet communication via 4-wire cables (twisted pair) and data transfer via 2-wire cables (single twisted pair). This means existing PROFIBUS DP infrastructures can continue to be used, thereby avoiding costly retrofitting at the field level in particular.
Benefits
High availability of process plants
NAMUR NE 21-compliant
High level of flexibility due to use of bus adapters
Can be used in process automation thanks to conformal coating, extended temperature range (-40 °C to +70 °C) and extended installation altitude of 4000 m
Space savings due to slim design based on SIMATIC ET 200SP
Use of existing PROFIBUS cable infrastructure with the BA 2xRJ45VD HA BusAdapter
Whatsapp us ...