Tag: jual aksesoris pabrik

Ausrack Plus Network

A 19″ network cabinet that combines versatility and strength with easy-to-use features.

Applications

Ausrack Plus Network is designed to accommodate medium to large passive patching networks and active communications equipment. By the use of cable zones and cable management systems, tailored, structured cable management solutions can be incorporated to suit any network application. Designed for data centre applications and can easily be bayed to other cabinets or racks.

A front perspex and rear steel door are included however there are many door and side panel options which can be included by designing your solution from an Ausrack Plus Frame.

Features

  • EIA-310-D and SSI standard compliant
  • Static load rating of 1400kg
  • Seismic load rating of 900kg
  • Inset corner posts
  • Depth adjustable RU marked rails
  • Doors can be hinged on the left or right side
  • 2-point locking doors with low profile lockable handle
  • More than 20 strategically placed cable entries
  • Removable side panels
  • Easily bayed to other cabinets or racks
  • Frame designed to allow two or more people to work on installation at once

Inclusions

  • Frame and 2 x side panels
  • Front reinforced tinted acrylic window door
  • Rear steel door
  • 2-point locking doors
  • Key lockable wing knob
  • 4 x full height RU marked mounting rails
  • Flat top cover (24RU racks only )
  • Gland plates (40 & 45RU racks only)

Construction

  • Body – Zinc coated steel
  • Frame thickness – 1.6mm
  • Rail thickness – 2.0mm
  • Panel thickness – 1.2mm
  • Window – Acrylic
  • Surface finish – Powdercoated textured matt black
Download Brochure …
Flayer …

Ausrack Floor Server onyX

A 19″ server cabinet that features a concave mesh front door, split mesh rear doors and removable side panels in a powdercoated textured matt black finish.

Applications

Suitable for housing network equipment such as patch panels, modems and routers, servers and CCTV equipment.

Features

  • Static load rating to 1000kg – compliant to AS62208-2006
  • EIA-310-D and SSI Standards Compliant
  • Keylockable swing handle (keyed to 92268) on front mesh door and split mesh rear doors
  • Removable side panels
  • Full height RU marked and notched mounting rails
  • Full height cable management systems (800mm wide cabinets only)
  • 10-way Australian 3Pin power rail
  • Roof mounted 4-way fan tray with thermostat
  • 3 x fixed shelves

Inclusions

  • Frame and 2 x side panels
  • Keylockable swing handle (keyed to 92268) on front mesh door and split mesh rear doors
  • 4 x full height RU marked and notched mounting rails
  • 4 x full height vertical cable management systems with snap cover and internal cable rings (800mm wide cabinets only)
  • 3 x fixed shelves
  • Roof mounted 4-way fan unit with thermostat
  • 10-way Australian 3Pin power rail
  • Adjustable feet and braked castor kit
  • 20 x cage nuts and screws with insertion / removal tool

Construction

  • Manufactured from:
    Frame – 2.0mm zinc coated steel
    Panel – 1.2mm zinc coated steel
  • Powdercoated textured matt black
Download Brochure …
Flayer …

Ausrack Cable Management

The Ausrack range of data cabinets are enhanced with the addition of vertical and horizontal cable management solutions.

Applications

Designed for use in high density cabling applications.

Features

  • Suitable for most Ausrack cabinets
  • Modular plastic finger guide with rounded edges to protect cables
  • RU spaced for alignment with equipment

Construction

  • Fingers – Plastic
  • Panels – Aluminium / zinc coated steel
  • Surface finish – Powdercoated textured matt black

Inclusions

All cable management products are sold as complete units. For more information on any of our cable management solutions contact your local sales engineer to discuss your requirements.

Download Brochure …
Flayer …

Signature SE – Zinc Coated Steel

An IP43/IP55, switchboard building system for low Voltage switchboards and motor control centres (MCC’s).

Applications

Signature SE from B&R offers a type-tested certified solution for any commercial or industrial switchboard. It is is a modular switchboard building system with an ongoing program of certification to ensure compliance to all the latest design codes. The switchboard system is designed to suit your application by our team of experienced engineers. It is then pre-assembled at our plant in Brisbane and shipped to site, built up and ready for equipment to be installed, saving you the time required to build other kit type systems. Certified to: –

  • AS/NZS 3439.1
  • AS/NZS 61439.1-2
  • BS EN 60439.1
  • IEC 60439.1

Features

  • IP43 and IP55 protection rating – more info on IP ratings
  • Fault Rating up to 100kA for 1 second and 65kA for 3 seconds
  • Current Rating from 600-3400 Amps (4000 Amps incomer)
  • Impulse Voltage withstand up to 16kV
  • Dielectric Withstand of 3.5kV
  • 10 drive module sizes
  • Up to 12 drive modules per tier

Construction

Product Information …
AS/NZS 61439
Testing Compliance
Flyer …
Product Guide …

SCEC Approved Class B and Class C Security Cabinets

B&R is proud to release Ausrack CQr, the latest range of Class B and Class C security cabinets. Ausrack CQr has been designed to meet and pass the recent SCEC guideline changes, and is included in the latest Security Equipment Evaluated Products List (SEEPL).

As B&R’s certified SCEC approved product, Ausrack CQr has been redeveloped to the highest standard in order to deliver Tier 3 and Tier 4 level security for Australian Government agencies and private enterprises.

With this new design, B&R can now offer the widest and tallest door mesh area allowed under SCEC requirements. B&R has also developed a unique way to solve your side-to-side airflow requirements for switches such as the Cisco 7000 series.

Featuring a comprehensive range of accessories, including specially designed cable management, Ausrack CQr cabinets can be adapted to suit any application needs.

If you can’t find a solution that’s right for you, contact B&R and our team of designers will work with you to engineer a fully customised product.

Download Brochure …

The Emergency Shutdown Valve (ESDV)

The Emergency Shutdown Valve (ESDV) controls process media flow and is responsible for isolating the supply of hazardous gasses and fluids within the pipeline in the event of an emergency. As a result, these valves provide more reliable performance than standard on-off valves.

Emergency Shutdown Valves Safety Features

■ Tight Shut Off With a double-seated design, ESDV’s are rated up to ANSI Class VI shutoff providing bubble tight shutoff.

■ Fire Safe In the event of an emergency, your assets may be exposed to fire, all ESDV’s are rated to API 607 Fire Safe.

■ Fast-Acting Quick response is critical to reducing escalation of hazards, ESDV’s can go from full-open to full close in less than a second.

■ Manual and Automatic Release Options Users have flexibility on resumption of system operation after shutdown.

■ Rugged Design Designed to withstand shocks and vibrations that could cause false trips, ensuring your systems is up and running when it needs to be

■ Customizable Configurations Several unique configurations can be engineered to meet your specific application’s needs

■ Certified Safety Integrity Level (SIL) per IEC 61508 The ESDV has been evaluated by an independent third party, those that have not been evaluated are relying solely on manufacturers’ product claims

■ Capable of Both Local and Remote Partial Stroke Test Users can minimize system disturbances to prevent and diagnose potential operational problems

Brochure Download …