SITRANS F M MAG 1100 is a wafer design sensor in stainless steel with highly resistant liners and electrodes and is designed for the general industry environment. The flangeless wafer design meets all flange standards. 
The SITRANS F M MAG 1100 is used in all industries where the corrosion-resistant stainless steel housing and the highly resistant liner and electrodes fit even the most extreme process media.

In order to have a complete flowmeter please combine it with one of the following MAG transmitters:

SITRANS F M MAG 5000: Cost efficient transmitter, accuracy of + 0.4 % of flow rate

SITRANS F M MAG 6000: Bus communication, batch function and accuracy of + 0.2 % of flow rate

SITRANS F M MAG 6000 I: Alu enclosure, Ex approvals, bus communication, batch function and accuracy of + 0.2 % of flow rate

Application examples: Process industry, Chemical industry, Water treatment

Detail

Meassuring range	0 to 10 m/s
Nominal Sizes	From DN 2 to DN 100 (1/12″ to 4″)
Accuracy	0.2 % ±1 mm/s 0.4 % ±1 mm/s (PFA)
Operating Pressure	Max. 40 bar (Max. 580 psi)
Ambient temperature	From -40 to 100 °C (-40 to 212 °F)
Medium temperature	From -30 to 200 °C (-22 to 390 °F)
Liners	Ceramics  PFA
Electrodes	Platinum  Hastelloy
Material	Stainless steel AISI 316L (1.4404)
Approvals	ATEX – 2 GD Zone 1, FM Class 1 div 2

Benefits

• Compact wafer design meets EN 1092, DIN and ANSI flange standards
• Easy Plug & Play field changeability of transmitter
• Compact or remote mounting possible
• Highly resistant liner and electrodes that are suitable for most extreme process media
• Designed to allow patented MAG in-situ verification using the SENSORPROM fingerprint

The SITRANS F M  MAG 5100 W  with its patented liners of hard rubber NBR or ebonite and EPDM is a sensor for all water applications such as ground water, drinking water, cooling water, waste water, sewage or sludge applications.  
 

In order to  have a complete flowmeter, please  combine it  with one of the following MAG transmitters:

 SITRANS F M MAG 5000: Cost efficient transmitter, accuracy of + 0.4 % of flow rate

SITRANS F M MAG 6000: Bus communication, batch function and accuracy of + 0.2 % of flow rate

SITRANS F M MAG 6000 I: Alu enclosure, Ex approvals, bus communication, batch function and accuracy of + 0.2 % of flow rate

The sensor can be combined with the energy calculator  SITRANS FUE950  

Application examples: Water abstraction, Water distribution network, Waste water and as custody transfer water meter or cooling meter.

Detail

Meassuring range	0 to 10 m/s
Nominal Sizes	From DN 15 to DN 2000 (1″ to 78″)
Accuracy	0.2 % ±2.5 mm/s
Operating Pressure	Max. 16 bar (Max. 150 psi)
Ambient temperature	From -40 to 70 °C (-40 to 158 °F)
Medium Tempreature	From -10 to 70 °C (14 to 158 °F)
Liners	EPDM NBR hard rubber Ebonite hard rubber
Electrodes	Hastelloy C-276  Built-in grounding electrodes
Material	Carbon steel, with corrosion resistant  two-component epoxy coating
Drinking Water Approvals	EPDM: WRAS, NSF/ANSI Standard 61, DVGW 270,  ACS and BelgAqua NBR: NSF/ANSI Standard 61, WRAS Ebonite: WRAS
Custody Transfer Approvals	OILM R 49  MI-001 PTB K7.2 (Germany) BEV OE12/C040 (Austria)
General approval	MCERTS Sira Certificate No. MC080136/00

Benefits

• Short lead time
• Rugged NBR hard rubber liner for all water and wastewater applications
• EPDM liner specifically for drinking water applications requiring special approvals
• Ebonite liner for drinking water, water and wastewater applications
• Increased low flow accuracy for water leakage detection (NBR or EPDM liner)
• Suitable for direct burial and constant flooding (IP68)
• Designed to allow patented MAG in-situ verification using the SENSORPROM fingerprint