Finding a way to easily and correctly mount electrical enclosures is a common problem. To help with these issues, B&R Enclosures supply MEB/S wall mounting brackets.

The MEB/S wall mounting bracket correctly mounts an enclosure so that it stands off the wall slightly, allowing water, debris etc to be washed completely off the enclosure rather than collecting in a stagnant zone. This helps prevent corrosion and maximises the working life of the enclosure.

They are also designed so that the bolt holes for mounting the enclosure to the wall are easily accessible to help make installation as simple as possible. The MEB/S bracket comes with all assembly instructions and hardware required for fitting to your enclosure: –

• Universal NI – No drilling required, feet are bolted directly into step bolts on the back of the enclosure.
• Monarch IP – Drilling required. Feet to be fitted using the gaskets and washers provided.
• Connector TE – Drilling required. Feet to be fitted using the gaskets and washers provided.

For more information download our wall mount bracket installation instruction.

The EMO range of wall mounted air conditioners are designed for outdoor applications.

Applications

Design for outdoor applications and suitable for use where the internal temperature of the cabinet is required to be lower than the ambient temperature.

Features

• IP55 protection rating – electrical
• IP34 protection rating – mechanical
• Surface mounted
• Ozone friendly R134a or R407C
• External ambient temperature range extends from -20ºC to 55ºC
• Other supply options area available on special request

Comes standard with:

• Electromechanical thermostat factory set to 35ºC
• All mounting hardware
• Template

Construction

• Mild steel construction (stainless steel available on request)
• Powdercoated Pebble Grey RAL7032 surface finish

An IP66, small main board that was developed for local electricity and distribution requirements.

Applications

The Monarch SMB is a small main board that was developed as a solution to various local electricity and distribution requirements.

Features

• Used in remote metering applications or emergency power restorations.
• Developed as a solution to various local electricity and distribution requirements.
• CT chassis are type-tested and certified for up to 50kA for 1 second.
• Flush front door with concealed hinges.
• Stainless steel door hinge pins.
• Segregated consumer and authority sections.
• Insulated meter panel.
• Heavy-duty 3 point locking system.
• Complete and fitted with CT chassis, metal potential fuse bracket, sealing devices, escutcheons, plinth, meter and consumer panels.
• Suitable for the mounting of supply authority and private current transformers.

Construction

• Manufactured from 1.6mm zinc coated steel or 316 stainless steel
• Powdercoated Pebble Grey RAL7032 or N4 surface finish

An IP66, premium industrial enclosure and switchboard building system designed to be the ultimate in flexibility.

Applications

Designed to be the ultimate in flexibility the Monarch IP system is suitable for small motor control applications, lighting, CT metering and small switchboards (to form 2).

Features

• IP66 protection rating – more info on IP ratings
• C rail mountings for equipment
• Gland plate on all but 175 and 270mm deep enclosures
• Vertical body and door rails
• 3 point locking on models of 600mm high and above
• Lockable L handle on enclosures 1600mm high and above (7mm square key turnbuckle lock on others)
• Mounting pan is optional extra

Construction

• 1.6mm thick zinc coated steel
• 1.6mm steel gland plate (brass also available as an option)
• Stainless steel hinges and hinge pins for easy door opening
• Concealed removable hinging
• Polyurethane gasket (formed in place)
• Pebble Grey (RAL7032) powdercoated paint finish (ripple orange also available as an option)

An IP66, 316SS, multiple application enclosure & switchboard building system suitable for a wide variety of applications.

Applications

Suitable for a wide variety of applications in severe environmental conditions. Designed to be the ultimate in flexibility the Monarch IP system is suitable for small motor control applications, lighting, CT metering and small switchboards (to form 2).

Features

• IP66 protection rating – more info on IP ratings
• C rail mountings for equipment
• Gland plate fitted internally or externally on units 400mm or above enclosures.
• Vertical body and door rails
• 3 point locking on models of 600mm high and above
• Lockable L handle on enclosures 1600mm high and above (7mm square key turnbuckle lock on others)
• Mounting pan is optional extra

Construction

• 1.2/1.5mm thick 316 stainless steel
• 1.5mm 316 stainless steel gland plate (brass also available as an option)
• Stainless steel hinges and hinge pins for easy door opening
• Concealed removable hinging
• Polyurethane gasket (foamed in place)
• ASSDA approved N4 surface finish

An IP66 special purpose, rugged enclosure suitable for 1000 volt applications.

Applications

Suitable for underground mining applications in tough Australian conditions.

Features

• IP66 protection rating – more info on IP ratings
• Pintle hinges
• Suitable for 1000 volt applications
• 100 micron UV resistant modified polyester paint finish
• Suitable for temperatures -10ºC to +60ºC
• Specially desgined flat faced gutter
• FIP polyurethane gasket with flat face seal for long-life

Construction

• Manufactured from 2mm zinc coated steel
• Powdercoated French Blue or X-15 (orange available on request)

Inclusions

• Steel mounting pan powdercoated white
• 7mm square turnbuckle lock (2 supplied on enclosures 800mm high and above)
• Earth strap kit