Kategori: Data ICT

Metered, Outlet Switch PDUs (EN2000 Series)

Real-time metering and network monitoring of power loads for overload avoidance, capacity and load balancing and energy use optimisation.

Application

Distribution of power inside a data centre environment where a variety of different power connectors are required.

Features

PDU Energy Metering and Monitoring

  • PDU level watt-hour energy metering (kWh)
  • PDU level power measurements (W)
  • Input phase level power measurements (V,A, VA, kWh, pf)
  • Circuit breaker level current measurements
  • High-accuracy, billing-grade metering capabilities
  • Embedded memory log to record/view/report historical data
  • User customisable alarm thresholds & notifications

Outlet Level Switching

  • Remote on/off power control by individual outlet
  • User-defined power on time delay to sequence IT equipment
  • Automatic sequencing to avoid inrush current overload
  • Outlet level user security with assignable roles and user access

Design

  • Low profile, space saving design
  • Ultra low profile circuit breakers on most models
  • Adjustable too-less mounting system
  • Colour coded and locking IEC receptacles and locking power cord compatible
  • Field rewireable input cord for front or top mounting

Environmental & Security Management

  • Optional Plug & play external environmental sensors including temperature, humidity, dry contact and water leak
  • Rack access monitoring with door contact switch
  • User customisable alarm thresholds and notifications

Network Management and Local Display Interface

  • Fully featured network management and altering capabilities supporting HTTP, HTTPS, SSH, Telnet, SNMP, Syslog and email
  • Strong encryption, passwords and advanced authorisation options including local permissions, LDAP/S and Active Directory
  • Daisy chain up to 4 rack PDUs and 24 environmental sensors through a single IP address
  • Largest in class, high visibility, oLED display

Circuit Breaker Status Monitoring

  • Active monitoring and alarming of circuit breaker on/off status

Compliance Approvals

  • AS/NZS3123
  • EN/IEC60950-1 Safety
  • CE approval
  • ROHS, WEEE environmental approvals
Download Brochure …
Flayer …

Metered PDUs (EN1000 Series)

Real-time metering and network monitoring of power loads for overload avoidance, capacity and load balancing and energy use optimisation.

Application

Distribution of power inside a data centre environment where a variety of different power connectors are required.

Features

PDU Energy Metering and Monitoring

  • PDU level watt-hour energy metering (kWh)
  • PDU level power measurements (W)
  • Input phase level power measurements (V,A, VA, kWh, pf)
  • Circuit breaker level current measurements
  • High-accuracy, billing-grade metering capabilities
  • Embedded memory log to record/view/report historical data
  • User customisable alarm thresholds & notifications

Design

  • Low profile, space saving design
  • Ultra low profile circuit breakers on most models
  • Adjustable too-less mounting system
  • Colour coded and locking IEC receptacles and locking power cord compatible
  • Field rewireable input cord for front or top mounting

Environmental & Security Management

  • Optional Plug & play external environmental sensors including temperature, humidity, dry contact and water leak
  • Rack access monitoring with door contact switch
  • User customisable alarm thresholds and notifications

Network Management and Local Display Interface

  • Fully featured network management and altering capabilities supporting HTTP, HTTPS, SSH, Telnet, SNMP, Syslog and email
  • Strong encryption, passwords and advanced authorisation options including local permissions, LDAP/S and Active Directory
  • Daisy chain up to 4 rack PDUs and 24 environmental sensors through a single IP address
  • Largest in class, high visibility, oLED display

Compliance Approvals

  • AS/NZS3123
  • EN/IEC60950-1 Safety
  • CE approval
  • ROHS, WEEE environmental approvals
Download Brochure …
Download Brochure …
Flayer …

Customer Cabinets

Cabinets for telecommunications equipment in the customers premises.

Applications

A range of enclosures designed for installation of telecommunications equipment inside customers premises. Designed for installation inside telephone exchanges to house standard telecommunication equipment and accessories. Cabinets come supplied with glazed, louvered, or mesh doors.

Features

  • ETSI standard compliant
  • RU / SU equipment rails
  • Suitable for 19″ or 21″ equipment
  • Various fasteners to facilitate installation
  • Supplied with various door options
  • Variety of accessories
  • All customer cabinets have the following equipment mounting positions:
    Front Mount 19″ / 21″
    75mm Mount 19″ / 21″
    140/170mm Mount 21″
    Rear Mount 19″

Construction

  • Robust zinc coated steel
  • Structurally certified to meet seismic and static load requirements
  • Durable powdercoat finish
Download Brochure …
Flayer …

CT Metering

CT Metering small main boards & CT chassis systems. Suitable for the mounting of supply authority and private current transformers.

Features

  • Suitable for the mounting of supply authority and private current transformers

Construction

  • Manufactured from 1.6mm zinc coated steel or 316 stainless steel available on request
  • Powdercoated Pebble Grey RAL7032
Download Brochure …

Cold Aisle Containment

Cold aisle containment solutions increase your cooling efficiency whilst reducing power consumption.

Cold aisle containment is a method of increasing cooling efficiency, reducing power consumption and is intended to prevent air temperature zones from being mixed together in a data centre.

Cold air is fed through a false floor into a contained cold aisle. This air flows through the front of the server racks, removes the heat from installed equipment and is expelled as hot air through the rear of the cabinet. The hot air is then removed by the data centre air conditioning system.

Having the cold aisle contained means the area requiring cooling is much smaller and therefore less power is required by the C.R.A.C (computer room air conditioner) unit to keep it at the recommended temperature.

Cold aisle containment ensures businesses do not have to increase the cooling capacity within the data centre whilst increasing cooling efficiency and reducing costs.

Features

The main benefits of cold aisle containment are:

  • Avoids hot air short circuits
  • Reduces the volume of air that needs to be cooled
  • Improves efficiency of the cooling system considerably
  • Energy cost savings

Installing a cold aisle in a workplace improves the working environment for staff, as the room does not need to be kept at a low ambient temperature. Even the cold aisle can often be warmer than that of an uncontained data centre. An uncontained data centre needs to have it’s air conditioning set for the installation that requires the most cooling, where ever that is within the data centre.

B&R Enclosures cold aisle containment systems are quoted on a project basis after an on-site consultation with one of our experienced sales engineers.

Download Brochure …

Ausrack Wall Brackets

Light duty wall mount 19″ bracket. Suitable for applications where cabinet mounting is not practical and space is limite

Light duty wall mount 19″ bracket. Suitable for applications where cabinet mounting is not practical and space is limited. One side is hinged to allow patch panels and equipment to be swung out for rear access. Available in 1RU, 2RU and 4RU sizes.

Download Brochure …
Flayer …

Ausrack Wall

An easy-to-install 19″ wall mount cabinet for heavy duty applications.

Applications

Typically used for the housing of patch panels and network equipment where floor space is at a premium.

Features

  • EIA-310-D standards compliant
  • Acrylic front door for maximum viewing of equipment
  • Same key codes for both rear swing frame and front door
  • Adjustable rail depth
  • Rear swing frame for easy access
  • Lift off hinges on swing frame
  • Reversible hinged front and rear doors
  • Vented sides
  • Vented top (on 600mm deep models only
  • Cable entry points top and bottom on enclosure and swing frame

Construction

Download Brochure …

Ausrack TxD

A versatile rack with 4 corner posts, suitable for 19 inch, 21 inch, 23 inch or 26 inch equipment.

Applications

Designed for transmission and data applications in telecommunications exchange and data centre environments.

Features

  • EIA-310-D, SSI and ETSI standards compliant
  • Static load rating of 1400kg
  • Seismic rating of 750kg
  • Depth adjustble RU marked rails
  • Suitable for 19″, 21″, 23″ and 26″ equipment (optional mounting rails required for 21″, 23″ and 26″)
  • Easy baying with or without side panels
  • 2 point door locking system
  • Comprehensive range of accessories

Construction

  • Manufactured from 1.6mm zinc coated steel
  • Powdercoated textured matt black
  • Frame thickness – 1.6mm
  • Rail thickness – 2.0mm
Download Brochure …
Flayer …

Ausrack Power Rails

A range of horizontal and vertical basic power rails used for the power distribution inside cabinets and enclosures.

Applications

The Ausrack Power Rails are a range of horizontal and vertical basic power rails used for the power distribution inside cabinets and enclosures. These power rails are suitable for use in all Ausrack cabinets. Custom power rails can be manufactured to a customer’s specifications.

Suitable for distribution of 10A and 15A circuits to a number of 10A SAA outlets or IEC outlets inside an enclosure.

Features

  • Tested to Australian Standards and SAA approved
  • Also available with surge protection options
  • Horizontal and vertical mounting
  • 6, 10, 20-way SAA outlets with 10A or 15A input plugs
  • 10-way IEC320-C13 outlets with IEC320-C14 or C20 input plugs
  • Suitable for use in all Ausrack cabinets
  • 10A or 15A circuit breaker
  • Custom power rails are available on request

Inclusions

  • Power rail
  • 2m lead
  • Mounting brackets
  • All fixing hardware

Construction

  • Body – extruded aluminium
  • Surface finish – black
Download Brochure …
Flayer …

Ausrack Plus Server

Designed for large data room applications that require a robust, fully featured server rack solution.

Applications

An essential platform for flexible computing solutions. It is a robust, 19 inch infrastructure rack designed with a high load rating and inset corner posts, combining versatility and strength with easy to use features.

Designed for large data room applications that require a robust, fully featured server racking solution with free flowing air movement.

There are many door and side panel options which can be included by designing your solution from an Ausrack Plus Frame.

Features

  • EIA-310-D and SSI standard compliant
  • Static load rating of 1400kg
  • Seismic rating of 900kg
  • Inset corner posts
  • Innovative modular cable management facilities
  • Reversible hinged doors (tool-less)
  • 2-point locking
  • 63% open mesh front and rear doors for ventilation
  • Cabinets can be bayed with the use of a simple accessory
  • Frame designed to allow two or more people to work on installation at once

Inclusions

  • 4 x RU marked mounting rails
  • Mesh doors (600mm wide cabinets)
  • Front & rear split mesh doors (800mm wide cabinets)
  • Side panels
  • Lockable wing knob with 2-point locking

Construction

  • Body – Zinc coated steel
  • Frame thickness – 1.6mm
  • Rail thickness – 2.0mm
  • Panel thickness – 1.2mm
  • Surface finish – Powdercoated textured matt black
Download Brochure …
Flayer …